MAX II “bolt on” Solid AXLE Later 17 3/4″ BOLT ON STYLE With no brass bushing Please read entire description.
MADE IN THE USA
NEW STRONGER AXLE
Axle now includes a hub made out of solid billet steel: All one piece.
A major imporvement on orignal old style axles in which this hub were brittle cast iron.
Wheel flange is now 3/8″ thick, which is a major imporvement on original old style axles which were only 1/4″ thick.
These hubs are MUCH stronger than the old style cast iron hubs.
Yes: Wheel flange and reinforcement tapered hub are all machined as one piece out of SOLID steel.
Also included automotive grade wheel studs.
This solid hub detail is only shown in the last photo. But your ordered axle will come with it.
This is a replacement upgrade solid axle with a 3/8″ 5 bolt wheel flange.
Fits MAX II machines after serial number 19620 with “bolt on” sprockets will not fit spline axles
Axle assembly fit only machine with ” bolt on” sprockets, this means the sprockets bolts on to the axle with a single bolt, the bolt goes through the sprocket and axle, DOES NOT FIT MACHINES WITH SPLINE AXLES.
NOTE: DOES NOT FIT MAX II’s WITH SPLINE AXLES
This axle is the “short ” version, it measures about 17 3/4″ from end to back side of the 5 bolt wheel flange.
The bolt hole is about 4 1/2″ from inner end of axle.
The axle is also drilled on the end, you you can provide a bolt and washer to help stop axle from
coming out of the inner bearing.
This axle to be used only with bolt on” sprockets
DO NOT PURCHASE THIS AXLE UNLESS YOUR SPROCKET BOLTS ON TO REAR AXLE with a single bolt.
make sure you need this “short” version, we do offer the “long” versions
Old RI part number 70529
PLEASE MEASURE YOUR OLD AXLE BEFORE ORDERING AS MANY MACHINES HAVE MISMACHED AXLES INSTALLED
If you have any questions as to if this part will fit your MAX, please call us at number below:
We stock most parts for MAX ARGO ATTEX HUSTLER TERRA TIGER AMPHICAT COOT and many other machines.
You are welcome to call us at 812-944-1643 8am-6pm Eastern weekdays